Home > Components > Jetson Nano Component Kits >

NANO JETBOT KIT - An educational AI robot based on NVIDIA Jetson Nano.
NANO JETBOT KIT - An educational AI robot based on NVIDIA Jetson Nano.
 
Alternative Views:


If you are a company with in the EU other than Ireland, please provide your VAT number, preceded by the your country code at check out and we will remove and re-fund the VAT element prior to shipping.

Also if you are a purchaser based in Norway, Switzerland or UK, we will re-fund the VAT element prior to shipping and will ship, delivery at place (DAP) and purchaser will be responsible for local taxes, duties and tariffs, if applicable.


Please note: This kit includes a M.2 wifi card that can only used with the NVIDIA 4GB Jetson nano development kit, for use with the 2GB version, an additional usb wifi dongle would be needed, as this board does not have a M.2 connector.

The Nano Jetbot Kit has been created to include all of the necessary components needed to build a Jetbot in addition to the 3D printed chassis and the NVIDIA Jetson Nano development kit.

For any volume quotes, please contact us on our details below:

T: +44 (0)118 981 6888
E: [email protected]

Our Price (ex VAT):212.00


Product Code: JETBOT-KIT
Qty:

Description
 
JetBot is an open-source robot based on NVIDIA Jetson Nano. Building and using JetBot gives the hands on experience needed to create entirely new AI projects. 

The Nano Jetbot Kit has been created to include all of the necessary components needed to build a Jetbot, just add the 3D printed parts and the NVIDIA Jetson Nano development kit.

  • 1x Raspberry Pi BMP (V2) Camera Module
  • 1x 160-degree FoV - Camera lens attachment
  • 1x 8265.NGWMG.NV Intel WIFI Card
  • 2x 2042811100 Wi-Fi antenna
  • 2x 3777 TT motor with 200RPM gearbox
  • 1x 2927 Motor Driver
  • 2x 3757 60mm wheel
  • 1x 1” Delrin POM Ball
  • 1x INIU 10000mAh portable power bank
  • 1x B071KWZBL3 right angle 2 pack USB cable
  • 1x 3527128 x 32 OLED Display
  • 2x 6130362102136 right angle header
  • 1x MB-MC64GA/EU Micro SD Card (64GB/u3)
  • 1x SKU2614 Micro USB, 5V 2.5A
  • 1x Adapter Euro/UK
  • 2x Adhesive pads
  • 20x M2 screw
  • 20x M2 washers
  • 4x M3 screw
  • 4x M3 nut
  • 4x jumper wires

Not included:

  • 3d printed parts (Chassis, camera mount, caster base (60mm), caster shroud (60mm)

All of the 3d parts can be downloaded and printed by yourself on your home 3D printer or by a professional online printing company. There are four parts to print: chassis, camera mount, caster base (60mm), caster shroud (60mm). These can all be downloaded via this link.

For further printing techniques and more information of printer setting for printing yourself, please see here. From a online professional printing service, there are an abundance of companies online which could print these parts for you, one of our recommendations would be i.materialise.com.



For further information and to get started, read the JetBot Wiki.



Getting Started with JetBot
NVIDIA Jetbot Neural Network Based Collision Avoidance Demo
NVIDIA Jetbot Review - Robotics for the Masses
Product Support

The Nano Jetbot Kit has been created to include all of the necessary components needed to build a Jetbot in addition to the 3D printed parts and the NVIDIA Jetson Nano development kit. All of the listed components included in this kit are based on the original NVIDIA Jetbot component design.

For further information and to get started, read the JetBot Wiki.


Accessories
NVIDIA JETSON NANO 4GB DEVELOPER KIT - 945-13450-0000-100
Our Price (ex VAT): €136.63
NVIDIA JETSON NANO 4GB DEVELOPER KIT - 945-13450-0000-100


Browse for more products in the same category as this item:

Components > Jetson Nano Component Kits
Components